$
2,499
.
00
+ HST
Deal expires on
03/31/2019
$
2,950
.
00
+ HST
Regular Price
15%
Savings
WINTER SPECIAL DEALS
WINTER SPECIAL!
$
389
.
98
+ HST
Deal expires on
03/31/2019
$
459
.
98
+ HST
Regular Price
15%
Savings
Technical Details
- 07-Current Wrangler JK, 2 & 4 Door
- Fabricated from durable 3/16" steel with a black textured powder-coat finish
- Integrated winch plate, round bull bar and reinforced D-ring shackle mounts
- Mounting tabs for auxiliary lights and 4 inch receptacles that allows installation of OE style fog lights, or Rampage Fog Lamp Kit (part number 5083059) or Driving Lamp Kit (Part number 5083060)
- Lights are not included
$
619
.
99
+ HST
Deal expires on
03/31/2019
$
720
.
99
+ HST
Regular Price
14%
Savings
Magnaflow Part #15160
For Jeep Wranglers 07-2018
MagnaFlow’s Diesel Performance line has been designed to provide the quality, power and sound we’re known for. Each system is manufactured from stainless steel, Dyno Proven to produce power with straight through mufflers for a deep mellow sound, backed with our lifetime construction warranty and offered at a competitive price.
Flowmaster Part# 817752
Flowmaster's Axle-back exhaust system is perfect for the person looking for an aggressive exterior and moderate interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear) emissions-legal system for the 2 and 4 door models, features a specially designed stainless steel Outlaw Series muffler and dual 2.5 Inch mandrel bent tailpipes. The system finishes with 4 Inch black ceramic coated stainless steel tips. The exhaust system is manufactured in the USA with 409S stainless steel and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit.
For Jeep Wranglers 07-2018
MagnaFlow’s Diesel Performance line has been designed to provide the quality, power and sound we’re known for. Each system is manufactured from stainless steel, Dyno Proven to produce power with straight through mufflers for a deep mellow sound, backed with our lifetime construction warranty and offered at a competitive price.
Flowmaster Part# 817752
Flowmaster's Axle-back exhaust system is perfect for the person looking for an aggressive exterior and moderate interior exhaust tone, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear) emissions-legal system for the 2 and 4 door models, features a specially designed stainless steel Outlaw Series muffler and dual 2.5 Inch mandrel bent tailpipes. The system finishes with 4 Inch black ceramic coated stainless steel tips. The exhaust system is manufactured in the USA with 409S stainless steel and is covered by Flowmaster's Lifetime Limited Warranty. Designed for an easy fit.
$
659
.
00
+ HST
Deal expires on
03/31/2019
$
749
.
99
+ HST
Regular Price
12%
Savings
NVE fender flares are made of aluminum and powder coated black.
Remove your bulky stock fenders and replace them with the new slim NVE narrow styled flares or with our wider tubular fenders.
Add style and wheel depth to your Jeep Wrangler.
Fits: Jeep Wrangler 07-18 .
Color: Powder coated black
Material: Aluminum
Style: Slim
Includes: Front and back
Light: LED side marker
NVE OFF ROAD is a Canadian Company.
Get Rugged off-road preformance with NVE.
Our products are designed for the off roaders, rock crawlers and everyday commuters. NVE set out to create an affordable yet strong and functional line of products.
NVE Off-Road accessories are built tough. All bumpers are made with solid steel and powder-coated matte black. Fenders and fender liner are made of aluminum.Strong and durable designs.
We at NVE are Jeepers ourselves and know when you are out on the trails you want a brand that you can count on.
Follow us on social media, Facebook and Instagram @NVEoffroad.
Remove your bulky stock fenders and replace them with the new slim NVE narrow styled flares or with our wider tubular fenders.
Add style and wheel depth to your Jeep Wrangler.
Fits: Jeep Wrangler 07-18 .
Color: Powder coated black
Material: Aluminum
Style: Slim
Includes: Front and back
Light: LED side marker
NVE OFF ROAD is a Canadian Company.
Get Rugged off-road preformance with NVE.
Our products are designed for the off roaders, rock crawlers and everyday commuters. NVE set out to create an affordable yet strong and functional line of products.
NVE Off-Road accessories are built tough. All bumpers are made with solid steel and powder-coated matte black. Fenders and fender liner are made of aluminum.Strong and durable designs.
We at NVE are Jeepers ourselves and know when you are out on the trails you want a brand that you can count on.
Follow us on social media, Facebook and Instagram @NVEoffroad.
$
119
.
99
+ HST
Deal expires on
03/31/2019
$
132
.
00
+ HST
Regular Price
9%
Savings
GLADIATOR GRILL
Evil Grill (With Mesh)
Warrior Grill (With mesh) JK
Fits Jeep Wrangler JK 2007-2018
Evil Grill (With Mesh)
Warrior Grill (With mesh) JK
Fits Jeep Wrangler JK 2007-2018
$
169
.
99
+ HST
Deal expires on
03/31/2019
$
179
.
00
+ HST
Regular Price
5%
Savings
An all new Wrangler means all new slush mats. Keep your brand new Jeep
protected from the dirt, snow and mud that came from whatever adventure
you were on. The new JL Wrangler all-weather slush mats are the high
wall, bucket-style mats that provide the maximum amount of coverage The
slush mats have a cool terrain-style design in the rubber, and features a
red hot Jeep Logo on the front mats. The front mats are designed to fit
the JL Wrangler's floor drain holes to allow draining without removing
the front mats (If you want to fill the drain hole in the front mats you
can use your factory floor pan plugs or you can order extra floor pan
plugs in the Accessories Tab).
Each mat features nibbed backing and grommets for the retention posts in your Jeep's factory carpeting to help keep them in place.
Maximum coverage and protection from snow, rain, sand, and any other debris
The terrain-style design and red Jeep brand logo
Fit perfectly over the front drain holes to allow for draining
Durable nibbed backing and grommets
Floor liners will not slide out of place
Each mat features nibbed backing and grommets for the retention posts in your Jeep's factory carpeting to help keep them in place.
Technical Details:
Fits 2018+ Jeep Wrangler (JL)Maximum coverage and protection from snow, rain, sand, and any other debris
The terrain-style design and red Jeep brand logo
Fit perfectly over the front drain holes to allow for draining
Durable nibbed backing and grommets
Floor liners will not slide out of place
$
180
.
00
+ HST
Deal expires on
03/31/2019
$
189
.
95
+ HST
Regular Price
5%
Savings
All-weather Floor Mats are the high wall, bucket-style to provide
maximum coverage and protect your floor from wetness, snow, mud, dirt
and grime. This four-mat set comes in Black and features a
terrain-style design and Red Jeep logo on the front mats. The front
mats are designed to fit the vehicle floor drain holes to allow for
draining without removing the mat. Each mat features nibbed backing and
grommets for retention posts (two for each front mat and one for each
rear mat) to keep them in place. The mats pass all production tests for
cleanability, extreme temperatures, weathering, strength and soiling.
Fits two-door Jeep Wrangler (JL).
$
168
.
98
+ HST
Deal expires on
03/31/2019
$
178
.
00
+ HST
Regular Price
5%
Savings
Need
an affordable solution to keep the cabin floors of your Jeep looking
factory fresh? Try Rugged Ridge's All Terrain Floor Liners! Made of a
durable OE-quality thermoplastic material that can withstand the rigor
of daily abuse, each liner is perfectly contoured to your vehicle's
floor for precise secure fitment (floor hook attachment where
applicable). The raised lip captures all spills, water and debris
keeping your interior pristine. Features a Chevron shape patented deep
tread technology.
Number Of Pieces:
3
Fitment:
Molded-Fit
Color:
Black
Material:
TPO - Thermoplastic Olefin
Features
- High Perimeter Wall Provides Maximum Protection
- Rolled Reinforced Edges For Added Strength
- Nibbed Bottoms For Secure Fitment
- Made Of A Durable OE-Quality Thermoplastic Material That Can Withstand The Rigor Of Daily Abuse
- Multiple Colors Available
- Limited Lifetime Warranty
$
168
.
98
+ HST
Deal expires on
03/31/2019
$
178
.
00
+ HST
Regular Price
5%
Savings
Number Of Pieces:
3 Piece
Fitment:
Molded Fit
Color:
Black
Material:
Plastic
Features
- Made Of A Durable OE Quality Thermoplastic Material That Can Withstand The Rigor Of Daily Abuse
- The Raised Lip Captures All Spills, Water And Debris Keeping The Interior Pristine
- The Chevron-Shape Patented Deep Tread Technology Channels Liquid Away From Your Shoes Keeping Them Dry
- Provides Complete Protection For The Cabin Floor Of Your Vehicle While Keeping It Looking Factory Fresh
- Injection Molded To Keep It's Shape In All Temperatures And Is Perfectly Contoured To Your Vehicle's Floor For Precise Secure Fitment
- Limited Lifetime Warranty
$
479
.
99
+ HST
Deal expires on
03/31/2019
$
503
.
99
+ HST
Regular Price
5%
Savings
A
limited budget doesn't have to mean limited capability. The all new
Carbine bumper offers Smittybilt's renown rugged construction while at
the same time letting the cost-conscious or entry level Jeeper play with
the big boys. Manufactured from 3/16 Inch cold-rolled steel and
finished with the signature two-stage, matte black finish, the Carbine
is fully backed by the Smittybilt Advantage Warranty.
- Raised Corners For Better Entry And Exit Under The Most Extreme Conditions
- Ability To Retain Factory Fog Lights
- Solid 3/4 Inch D-Ring Mounts - Welded On The Inside And Out
- Removable Bull Bar 1.75 Inch. 120 Wall Overrider And Kickers
- Integrated Gen2 Light Mounting Tabs On The Bull Bar
- Open Top And Side Design Fits Virtually All Winch Sizes
- Unique Triangulation Anchor Fastens To Frame In Multiple Locations
- Limited Lifetime Warranty
- FITS WRANGLERS JK 2007-2018
$
569
.
99
+ HST
Deal expires on
03/31/2019
$
598
.
98
+ HST
Regular Price
5%
Savings
Fits Jeep Wranglers year 07-18
Smittybilt has re engineered its entire line of JK front bumpers. They now fit the 2012 models with the vacuum pump inside the front frame. This means no modifications or relocation of the pump. Smittybilt front bumpers are engineered to provide the maximum protection without sacrificing the ability to go anywhere off road. Each front bumper features a 3/16 Inch solid plate center section that wraps and protects the frame horns and lower cross member, which provides the ultimate protection when off roading. Each front bumper has an integrated winch mount and is capable of holding a winch with up to a 15,000 Pounds rated line pull. Both the front and rear bumpers feature a two point shackle mount system that is welded on the outside and inside of the bumper. The 2.0 Inch over rider and wings are manufactured from 2 Inch wall tubing and are custom formed to compliment the front of your new Jeep®.
Smittybilt has re engineered its entire line of JK front bumpers. They now fit the 2012 models with the vacuum pump inside the front frame. This means no modifications or relocation of the pump. Smittybilt front bumpers are engineered to provide the maximum protection without sacrificing the ability to go anywhere off road. Each front bumper features a 3/16 Inch solid plate center section that wraps and protects the frame horns and lower cross member, which provides the ultimate protection when off roading. Each front bumper has an integrated winch mount and is capable of holding a winch with up to a 15,000 Pounds rated line pull. Both the front and rear bumpers feature a two point shackle mount system that is welded on the outside and inside of the bumper. The 2.0 Inch over rider and wings are manufactured from 2 Inch wall tubing and are custom formed to compliment the front of your new Jeep®.
With Bull Bar:
Yes
Type:
1-Piece
Tubular:
No
Finish:
Matte Powder Coated
Color:
Black
Material:
Steel
Drilling Required:
No
With Mounting Hardware:
Yes
With Grille Guard:
No
With Grille Insert:
No
With Winch Mount:
Yes
Winch Compatible:
Yes
Tow Hooks:
Without Tow Hook Mounts
D-Rings:
With D-Ring Mounts
With Light Cutouts:
No
With Skid Plate:
No
With Spare Tire Mount:
No
With License Plate Mount:
No
Features
- Manufactured From Cold Roll Steel
- Raised Corners Helps Better Entry And Exit Under The Most Extreme Conditions
- Solid D-Ring Mounts – Welds On The Inside And Out
- Solid Plate Center Section That Wraps The Frame Horns And Lower Cross Member
- One-Piece Welded Design
- Two Stage Matte Black Finish Powder Coat Finish
- Limited 5 Year Warranty
- Jeep Accessories GTA is an authorized dealer
$
699
.
99
+ HST
Deal expires on
03/31/2019
$
734
.
00
+ HST
Regular Price
5%
Savings
Technical Details
- Fits 2007 to 2018 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- Black powder coat
- Manufactured from 3/16” cold rolled steel and then robotically welded to the exact specifications
- Features pressed tapered 2” diameter bearings, reinforced double sided gussets
- 1-1/4” grade 5 mounting hardware
- 5-year limited warranty
$
0
.
00
+ HST
Deal expires on
03/31/2019
$
0
.
00
+ HST
Regular Price
0%
Savings
NO PAYMENTS FOR 90 DAYS!
NO INTEREST - NO CREDIT CHECK
Call 416-624-1357 for more details
NO INTEREST - NO CREDIT CHECK
Call 416-624-1357 for more details